XT 600

NEW DIMENSION IN EFFICIENCY

XT 600 - High-Speed Double Rotary Press


The XT 600 combines key features from proven KORSCH technology with a simple, modular, and cost-efficient design to offer a new standard in high-volume production equipment.  This robust and elegant tablet press features a simplified and streamlined platform for both semi-attended and fully automated production. The new control system interface combines an intuitive HMI environment with an unprecedented level of on-board help and assistance to advise the user in every aspect of the machine operation. 

High-Speed
Double Rotary
Press

XT 600 closed XT 600 open

> 1 MIO SINGLE-LAYER TABS/H.

BI-LAYER CAPABILITY

INTUITIVE CONTROLS WITH SMART-TOUCH HMI

TURRET REMOVAL

Technical & Chemical Applications

KORSCH has always been known for high reliability. The XT 600 was designed for uncompromising endurance use. A filling and dosing system optimized for throughput allows maximum output even with large-size tablets. Maintenance-friendly features enable short maintenance intervals and thus increase machine availability. 

Superior Output

The XT 600 is a workhorse for high-volume, 24/7 operation. It offers a 100 kN pre and main compression capability, 100 RPM press speed capability, and a maximum output of 1,000,000 single-layer tablets per hour. The XT 600 has the flexibility to produce both single and bi-layer tablets.  A bi-layer conversion kit can be adapted to the machine at any time.

Intuitive Operating Environment

The XT 600 features a modern ”SIMOTION” control system with Smart-Touch HMI that provides an intuitive operating environment and permits move, zoom, and scroll gestures. The HMI environment offers a comprehensive on-board help capability, which includes a vast array of multi-media help files to present procedures and to support operation and maintenance. 

Simple and Robust Design

The XT 600 offers a GMP compression zone that is both accessible and ergonomic. Four large windows maximize visibility and access for cleaning and changeover. Large access panels in the base of the machine simplify access for maintenance. The new Multi-Function Channels (corner columns) provide full access to wiring and dust extraction hoses, which are isolated from the compression zone.

Robust Compression Column Design

 The XT 600 offers both 60 kN and 100 kN compression columns which are suitable for all compression requirements and retrofitable at any time. The compression columns can be easily re-positioned to permit turret exchange or machine cleaning. There is full accessibility for maintenance, since the back panel of the column can be opened. The compression dwell bar extends consolidation time and increases tablet hardness at high speeds.

Minimal Noise and Vibration

The unique and patented design of the carrier plate, with dampers, fully isolates vibration from the head piece and machine base. The result is:

  • Very low noise emission <  80 dB(A)
  • No vibration transmission to the floor of the compression room
  • No segregation of powder in the feeding system which can occur with machine vibration

Innovative Feeder Concept

An innovative feeder design permits precise and simplified adjustment of the feeder gap. Available with a 2-chamber or 3-chamber variable speed feeder, or a gravity feeder, the XT 600 offers an extended feeder length to maximize filling time. The closed feeder design and unique sandwich seal insure a clean die table and superior production yields. A flexible coupling at the feeder inlet eliminates vibration and product segregation.

Exchangeable Turret

The exchangeable turret is designed for fast removal and installation and permits maximum output to be obtained for all tablet shapes and sizes. The new turret design permits the manual removal of the entire turret, including upper and lower cam track as well as press tools.

Segmented Die Table

Containment Solutions


KORSCH offers a wide range of containment solutions on most machine models, including DryCon® and WipCon® executions. With  proven  solutions  across  the  full  containment  range (OEB 3, OEB 4, OEB 5), KORSCH provides a fully turnkey system which is engineered to meet the specific requirements of the project. In partnership with the customer, KORSCH specialists define critical process parameters, including containment requirements, peripheral integration, and automation design. KORSCH engineers are expert in developing the concept, execution, integration, and final SMEPAC testing to fully validate the containment capability.

XT 600 DryCon®

The XT 600 DryCon® is a double-sided rotary press for high-volume manufacturing of highly active but not highly toxic products. The DryCon® execution permits contained access to the compression zone and eliminates the requirement for personal protection equipment (PPE) during operation.

LEARN MORE

XT 600 Downloads

Download our brochure or have a look at the technical data:


Rich Ferreira
Contact
KORSCH America Inc.
Rich Ferreira
Sales
South Easton, MA 02375
USA
Matt Morganelli
Contact
KORSCH America Inc.
Matt Morganelli
Sales
South Easton, MA 02375
USA
Garrett Mann
Contact
KORSCH America Inc.
Garrett Mann
Sales
USA
Ben McGandy
Contact
KORSCH America Inc.
Ben McGandy
Customer Care
South Easton, MA 02375
USA